Home > News > Content
Enables The Vehicle To Automatically Weigh The Material While Loading The Material
Jul 11, 2018

The automobile electronic scale is a kind of vehicle weighing equipment, which is integrated with the mechanical control part of the vehicle, and is weighed in the vehicle travel. It is weighed by monitoring the predetermined weighing position with a proximity switch and converting the hydraulic pressure into the weight of the load in the bucket.

The automobile electronic scale is a kind of vehicle weighing equipment, which is integrated with the mechanical control part of the vehicle, and is weighed in the vehicle travel. It is weighed by monitoring the predetermined weighing position with a proximity switch and converting the hydraulic pressure into the weight of the load in the bucket. It has two different working modes: target mode and accumulative mode. According to the operator's choice, the load can be automatically accumulated or deducted from the target set value.

The car electronic scale allows the vehicle to automatically weigh the material while loading the material.

Automotive electronic scales are widely used in the control of cargo loading in coal mines, ports, buildings and railway transportation.

· Two pressure sensors for measuring the pressure change of the on-board hydraulic system;

· A proximity switch that collects pressure data as the boom is lifted to the proximity switch;

· On-board instrument, symmetrical heavy data is calculated, and the weighing result is displayed on the screen of the meter

1. The automobile electronic scale should be preheated during use, and the boom should be lifted 5-10 times, which is the oil pressure and the sensor preheating to the normal working temperature.

2. During operation, when the bucket is lifted, firstly, the joystick's joystick should be placed in the extreme position, that is, the bucket is at the end.

3. The boom system should be strictly lubricated to reduce the friction coefficient of the boom

4. Select a flatter ground for weighing

5. The process of lifting the boom should be evenly controlled.

6. It is better to set zero when the car stops driving.

7. The weighing process avoids driving on the road. If you need to drive, you should control the speed at around 10KM/h.

8. If multiple buckets are equipped, the bucket used must be corrected when weighing

9. The electronic scale starts the car before starting the machine, and then turns off the car power after the electronic scale is turned off.

10. Avoid water flow like instrument when cleaning, avoid damage


Related News

Learn More Information About Our Products Know More
Copyright © Jiangxi Zonjli High-Tech Co.,LtdAll Rights Reserved.